This course is packed with 45 mini-labs where you can follow along with your instructor and really understand the theory. Each chapter ends with several full labs where you configure complex technologies and test your configurations. Written to help you pass the below exams:
- 200-120 CCNA – Interconnecting Cisco Networking Devices: Accelerated (CCNAX)
- 100-101 ICND1 – Interconnecting Cisco Networking Devices: Part 1 (ICND1)
- 200-101 ICND2 – Interconnecting Cisco Networking Devices: Part 2 (ICND2)
We take you by the hand and guide you through the entire CCNA syllabus broken into ICND1 and then ICND2 so you can take the one or two exam route. There is more than $400 worth of practice exams included, advanced challenge labs, and bonus study videos included for you to enjoy for no extra charge and to guarantee your success come exam day.
Take this course if:
- You have been studying for your CCNA for a while now but don’t feel ready
- Can’t seem to nail subjects such as subnetting or Access Lists
- Can’t find enough practise exams with solutions to prepare yourself
- Find just reading a study guide not sufficient to understand the material
- Want an easy-to-follow study program that will get you results
- Want free 24/7 access to live Cisco equipment to practise on
Your Instructor
Paul Browning
Is the author of Amazon best selling books Cisco CCNA Simplified and CCNA in 60 Days.He started teaching IT courses in 2002 after leaving Cisco systems and went on to create several successful online training companies and study guides.
Paul can explain difficult subjects in an easy-to-understand way which has made his classroom and online courses extremely popular. His easy subnetting method has been used by thousands of students from all over the world.
- Over 16 hours of video training
- Instructor guided labs
- End-of-module exams
- End-of-course certificate
- Access to members only forum
- Exam vendor – Pearson Vue
- Prerequisites – None
- Recommended – Network+ or CCNA Primer
Module 1 | Operation of Data Networks - ICND1 |
---|---|
Unit 1 | Network Devices and Functions |
Unit 2 | OSI and TCP Models |
Unit 3 | TCP Protocols and Services |
Unit 4 | Mini-Lab - Checking the ARP Cache |
Unit 5 | Mini-Lab - Proxy ARP |
Unit 6 | Mini-Lab - Ping Hostnames |
Unit 7 | Mini-Lab - Checking CDP Neighbors |
Unit 8 | Ethernet Concepts |
Unit 9 | Mini-Lab - Duplex and Speed Settings |
Unit 10 | Cabling the Network |
Unit 11 | Mini-Lab - Changing the Configuration Register |
Unit 12 | Lab – Router Modes and Commands |
Unit 13 | Lab - ARP, CDP, Ping and Telnet |
Module 2 | LAN Switching Technologies - ICND1 |
Unit 1 | Switching and VLANs |
Unit 2 | Mini-Lab - Checking the MAC Address Table |
Unit 3 | Mini-Lab - Configuring VLANs and Trunk Links |
Unit 4 | InterVLAN Routing |
Unit 5 | Mini-Lab - InterVLAN Routing Using Physical Router Interfaces |
Unit 6 | Mini-Lab - InterVLAN Routing Using Subinterfaces |
Unit 7 | Mini-Lab - InterVLAN Routing Using SVIs |
Unit 8 | VTP and Pruning |
Unit 9 | Mini-Lab - Configuring VTP |
Unit 10 | Mini-Lab - IP Default Gateway on a Switch |
Unit 11 | Lab - VLANs on an IOS Switch |
Unit 12 | Lab - Trunking Across IOS Switches |
Unit 13 | Lab - InterVLAN Routing |
Module 3 | IP Addressing - ICND1 |
Unit 1 | IPv4 Addressing |
Unit 2 | Subnetting |
Unit 3 | Fast Subnetting |
Unit 4 | Route Summarization and VLSM |
Unit 5 | Mini-Lab - Troubleshooting IP Addressing |
Unit 6 | Lab - IP Addressing |
Module 4 | IPv6 Addressing - ICND1 |
Unit 1 | IPv6 Addressing |
Unit 2 | Mini-Lab - Neighbor Discovery Protocol in Action |
Unit 3 | Mini-Lab - Configuring IPv6 |
Unit 4 | Lab - Simple IPv6 |
Module 5 | IP Routing Technologies - ICND1 |
Unit 1 | IP Routing |
Unit 2 | Static Routing |
Unit 3 | Mini-Lab - Configuring a Static Route |
Unit 4 | Mini-Lab - Configuring an IPv6 Static Route |
Unit 5 | Mini-Lab - Classful and Classless Routing Protocols |
Unit 6 | Mini-Lab - Configuring Cisco Express Forwarding |
Unit 7 | Lab - Static Routes |
Module 6 | OSPF - ICND1 |
Unit 1 | OSPF |
Unit 2 | Mini-Lab - Configuring Single-Area OSPF |
Unit 3 | Mini-Lab - Configuring OSPF Interfaces |
Unit 4 | Mini-Lab - OSPF Passive Interfaces |
Unit 5 | Mini-Lab - Configuring Single-Area OSPFv3 |
Unit 6 | Lab - Single Area OSPF |
Module 7 | IP Services - ICND1 |
Unit 1 | DHCP and DNS |
Unit 2 | Mini-Lab - DHCP Configuration on Cisco IOS Routers |
Unit 3 | Network Address Translation |
Unit 4 | Access Control Lists |
Unit 5 | CDP and NTP |
Unit 6 | Lab - Configuring a Router as a DHCP Server |
Unit 7 | Lab - Access Lists (Standard) |
Unit 8 | Lab - Access Lists (Extended) |
Unit 9 | Lab - Access Lists (Named) |
Unit 10 | Lab - Static NAT |
Unit 11 | Lab - NAT Pool |
Unit 12 | Lab - NAT Overload |
Module 8 | Network Device Security - ICND1 |
Unit 1 | Network Device Security |
Unit 2 | Mini-Lab - Adding a Telnet Password |
Unit 3 | Mini-Lab - Enabling SSH Access |
Unit 4 | Switch Port Security |
Unit 5 | Lab - Basic Router Security |
Unit 6 | Lab - Switch Security |
Unit 7 | Lab - Switch Port Security |
Module 9 | Network Troubleshooting - ICND1 |
Unit 1 | Troubleshooting Layer 1 |
Unit 2 | Troubleshooting VLANs |
Unit 3 | Troubleshoot Trunks and VTP |
Unit 4 | Mini-Lab - Troubleshooting VTP, VLANS, and Trunking |
Unit 5 | Troubleshooting IP Addressing |
Unit 6 | Troubleshooting Access Lists |
Module 10 | LAN Switching Technologies - ICND2 |
Unit 1 | Spanning Tree Prococol |
Unit 2 | Mini-Lab - STP Operations |
Unit 3 | Enhancements to STP and RSTP+ |
Unit 4 | Mini-Lab - Configuring UplinkFast |
Unit 5 | Mini-Lab - Configuring BPDU Guard |
Unit 6 | Mini-Lab - Configuring PVRST+ |
Unit 7 | Lab - Spanning Tree Protocol |
Module 11 | Understanding Etherchannels - ICND2 |
Unit 1 | Etherchannels |
Unit 2 | Mini-Lab - PAgP Configuration |
Unit 3 | Mini- Lab - LACP Configuration |
Unit 4 | Lab - LACP EtherChannels |
Module 12 | Router Architecture - ICND2 |
Unit 1 | Router Architecture |
Unit 2 | Cisco IOS Licensing |
Unit 3 | Lab - Copy Startup Config Using TFTP |
Module 13 | Advanced OSPF - ICND2 |
Unit 1 | Advanced OSPF |
Unit 2 | Mini-Lab - Configuring Multi-area OSPF |
Unit 3 | Mini-Lab - Configuring and Verifying OSPFv3 Multi-area in Cisco IOS Software |
Unit 4 | Lab - Multi-area OSPF |
Unit 5 | Lab - Multi-area OSPFv3 |
Module 14 | EIGRP - ICND2 |
Unit 1 | EIGRP |
Unit 2 | Mini-Lab - EIGRP Passive Interfaces |
Unit 3 | Mini-Lab - Configuring EIGRP |
Unit 4 | Lab - Configuring EIGRP |
Module 15 | Advanced IP Services - ICND2 |
Unit 1 | First Hop Redundancy Protocols |
Unit 2 | Mini-Lab - HSRP Configuration |
Unit 3 | Mini-Lab - VRRP Configuration |
Unit 4 | SNMP and Syslog |
Unit 5 | Mini-Lab - Cisco IOS Syslog Configuration |
Unit 6 | Lab - SNMP |
Unit 7 | Lab - Syslog |
Unit 8 | Lab - HSRP Configuration |
Module 16 | WAN Technologies - ICND2 |
Unit 1 | WAN Services |
Unit 2 | PPP and Frame Relay |
Unit 3 | Mini-Lab - Configuring PPP |
Unit 4 | Mini-Lab - Configuring PPPoE |
Unit 5 | Lab - Configuring PPP |
Unit 6 | Lab - Configuring Frame Relay |
Unit 7 | Lab - Configuring Frame Relay Subinterfaces |
Module 17 | Advanced Network Troubleshooting - ICND2 |
Unit 1 | Troubleshooting Using NetFlow |
Unit 2 | Troubleshooting STP |
Unit 3 | Troubleshooting InterVLAN |
Unit 4 | Troubleshooting Routing |
Unit 5 | Troubleshooting EIGRP |
Unit 6 | Troubleshooting OSPF |
Unit 7 | Mini-Lab - Troubleshooting OSPF |